When and Why Is It Necessary To Balance a Pump?

Pumps serve many purposes in New York City buildings. Booster pumps ensure adequate water pressure throughout a property, and sump pumps protect against flooding.

Whether a submersible or constant pressure design, pumps require regular maintenance to keep the need for pump repairs at a minimum. Proper maintenance includes occasional balancing. Because pumps contain several moving parts, the system can become unbalanced, which can result in premature breakdown. Discover when and why it is necessary to balance a pump.

Understanding Balancing and How It Helps You Avoid Costly Pump Repairs

Pump Impeller Balancing

Pump balancing focuses on the realignment of spinning or rotating parts, particularly the impeller. A perfect machine alignment equates to zero vibration or noise, but this is impossible. Because perfect alignment is impossible, the various components of a pump eventually become askew.

Misalignment or imbalance of a pump component can cause overheating and other significant issues. If left without correction, the pump can experience shaft deflection, mechanical seal failures, catastrophic bearing failures, or excessive vibration and noise. All problems from extensive and prolonged imbalance will likely result in significant pump repairs, if not a replacement.

Balancing is the elimination of vibration — as much as possible, anyway. There are two primary methods of balancing: static and dynamic.

Static Balancing

If an object’s center of gravity is on the axis of rotation, technicians can keep the object stationary, hence the name static balancing. The technician places the rotating elements of the unit on a horizontal axis. By allowing the device to remain static, the professional can observe any obvious heavy points from the elements that settle at the bottom of the rotation.

During static balancing, a technician will continue adding or removing material to improve the rotation. The addition or removal of material continues until no obvious “heavy” points remain.

The primary benefit of static balancing is that it requires minimal equipment and training. However, there are limitations to the process, and for centrifugal pumps, dynamic balancing is likely a better option.

Dynamic Balancing

Building owners should consider occasional dynamic balancing to prolong the life of their equipment and prevent costly pump repairs. The process involves rotating parts quickly and measuring imbalances with electronic equipment.

Dynamic balancing requires specialized equipment and displacement or acceleration sensors. When spun, the components with an offset or out-of-balance mass will increase their centrifugal force. By amplifying the readings from the sensors, a computer can identify even small amounts of imbalance.

Single Versus Dual-Plane Dynamic Balancing

A standard dynamic balancer measures the assembly’s balance on a single plane, which can present challenges when presented with end imbalances that may cancel one another out.

Longer pump shafts can have an overall balance. However, it is possible to create an unintentional strain that may damage bearings by offsetting perceived imbalances from the single-plane readings.

A dual-plane balancer, also known as a multi-plane balancer, overcomes the problems of a single-plane device. The dual-plane system has two sets of sensors on either side of the bearing pedestals. With multiple sensors, the balancer can independently identify imbalances on either side, offering a more accurate assessment of where the actual imbalances lie.

A single-plane balancer is usually sufficient for short components such as a pump impeller. A dual-plane balancer is typically necessary for longer shafts.

Annual Service Contracts

All mechanical devices require maintenance to maintain optimum performance. The moving parts vibrate, twist, and rotate at high rates of speed. A device’s standard operation will eventually cause an imbalance.

As pumps are pivotal to building operations, such as heating and cooling, plumbing, and flood prevention, they must maintain peak performance. If pumps break down, entire systems can fail.

Antler Pumps can service and repair all commercial and residential pumps in the NYC area. A property owner can sign-up for the annual service contract, ensuring timely scheduled maintenance and repairs of all pump equipment. The yearly service also includes pump balancing to ensure the proper operation and extend the life of the pump.

Identifying Common Balancing Issues

Vibration

Like all mechanical devices, pumps vibrate; there are acceptable limits to pump vibration, and they can indicate your pump is in good working order. Excessive vibration is problematic and can point to several internal issues with a pump, including cavitation, recirculation, and rotor imbalance.

Typically, to diagnose excessive vibration, you need to perform readings. Antler Pumps can help you identify vibration problems and correct them. Signing up for annual service contracts can ensure your pumps remain operational with reduced risks of vibration and maintenance issues.

Noise

Loud and unusual sounds from rotating pumps are never a good sign and often lead to necessary pump repairs. Noise can mean a number of issues, from air in the system to excessive bearing wear.

When the cause directly affects the rotation of the drive, the system can incur significant damage. Incorrect speed settings may lead to premature wear and out-of-sync components, resulting in excessive noise.

Also, clogs may interfere with the rotation of critical components, causing timing issues. The clog or debris can make noises as it interacts with system parts; the problem can also force pieces out of balance.

Routine maintenance through annual service contracts can reduce the likelihood of common problems and the risks of extensive repairs. Contact Antler Pumps to learn more.

Inefficiency

Pump imbalance often results in system inefficiency. The imbalance leads to increased force on the components and excessive vibration, which also causes mechanical faults throughout the drive and system. With the increasing faults and the undue pressure exerted on the entire system, the life of the pump also degrades.

Noticing poor pump performance or output is indicative of balancing issues. A system inspection is likely necessary if poor performance occurs alongside excessive vibration and noise.

Hiring Professionals To Avoid Expensive Pump Repairs

Call Antler Pumps for Your Balancing and Maintenance Needs

All mechanical devices need regular maintenance, especially those with rotating components like pumps. Pumps also need balancing to ensure functionality. Contact Antler Pumps at 212-534-2500 to schedule pump repairs or discuss annual service contracts.


Our Privacy Policy

Omnia Mechanical Group(the “Company”) strives to ensure the highest standards for property listings and customer information privacy. Please review the following statement to learn about our company practices and policies. Please be aware that our Privacy Policy is subject to change at any time.

1. Purpose.

This Privacy Policy (“the Policy”) provides information on how the Company uses your personal information. By agreeing to the Policy, you agree to our collection and use of your personal information as described in the Policy. This Privacy Policy is effective for all new users of Sanitaryplumbing.com.

2. Personal Information.

You can browse some areas of omniagroup.nyc (“the Website”) without being a registered user. However, certain activities do require registration. (You consent to the transfer and storage of your information by registering with omniagroup.nyc).

3. Use of Information.

Our primary purpose in collecting personal information is to provide you with a safe and user-friendly experience. For example, the Company may use your personal information to:

  • Improve our services and the Website’s content and layout;
  • Provide the services and necessary customer support you request;
  • Resolve disputes, collect fees, and troubleshoot problems;
  • Track and record customer satisfaction with our services;
  • Protect the Company against error and fraud;
  • Inform you of special promotions and announcements;
  • Enforce our agreements, terms, conditions, and policies; and
  • As otherwise described to you at the time of collection.

We may occasionally ask you to complete optional surveys. These surveys are used to improve and customize your experience with Sanitaryplumbing.com.

The Company always provides you the ability to opt-out of further communication such as promotions and surveys; see the Opt-Out section below.

The Company does not share any of your personal information with outside organizations, companies, individuals, etc. The only exception to this standard is if such a disclosure is reasonably necessary to respond to any and all legal processes.

4. Links to Other Sites.

The Website may have links to other websites that may collect personally identifiable information about you. The Company is not responsible for the privacy practices of the content of those linked websites.

5. Safety & Security Precautions.

The Website has strict security measures in place to protect you and your information from fraud. Once your information is provided to Omnia Mechanical Group, we strive to ensure the confidentiality of your identity and information.

6. Opt-Out.

The Company provides you with the opportunity to opt-out of receiving promotional and other non-essential, marketing-related communications from Omnia Mechanical Group. If you would like to opt-out of these select communications, please see any of the Company’s email communications and follow the directions indicated.

7. Account Protection.

Your password ensures the security of your account. When choosing a password, the Company suggests using various characters. It is highly recommended that you do not disclose your Sanitaryplumbing.com password to anyone. (If you do disclose your password or your personal information with others, you are responsible for all actions taken in the name of your account.) If the security of your password is compromised for any reason, please contact the Company immediately.

8. Accuracy of Information

The Company does not guarantee the accuracy of information for any and all of its properties on the Website, and is not responsible for any errors or misrepresentations (made by Renters, the Client, or otherwise).

9. Cookies

The Company may place a small cookie on your computer’s hard drive. This allows us to personalize your use on the Website. In order to maximize the functionality and usability of the Website, you must set your browser’s preferences to allow both permanent and temporary cookies.

10. Changing Your Personal Information.

Should your personal information change, please immediately update your information on the Website. This will ensure the accuracy of our records. The Company does retain personal information from closed accounts in order to comply with law and collect and disburse any fees owed.

11. Third Parties

This Privacy Policy addresses only the use of information we collect from you. Since omniagroup.nyc does not control the privacy policies of third parties, you are subject to the privacy policies of those third parties. It is advisable that you consult with the management of third parties before you disclose your personal information to others.

12. General

We may amend this Privacy Policy at any time by posting the amended terms on the Website. All amended terms are immediately effective after they are initially posted on the Website.

13. Privacy Policy Questions & Concerns

Questions and/or concerns regarding the Policy should be emailed to the following email address: info@omniagroup.nyc.