What Are the Different Types of Pipe Insulation: Choosing the Right Materials to Protect Your Pipes from Freezing

We may be approaching the dog days of summer in New York City, but fall is closer than we think. Soon enough, it will be time to turn on the heat and think about winterizing properties. Before the autumn chill arrives, it’s the perfect time to think about pipes that are at risk of freezing. If you’ve wondered, “What are the different types of pipe insulation?” this post is for you. We review the most common kinds of pipe protection and why you want to use them to safeguard your plumbing system.

Why Insulation Is Essential for Vulnerable Pipes

Beyond protection from freezing

Of course, the most obvious reason to insulate pipes is to prevent them from freezing. Freezing can result in bursting, which not only causes extensive water damage but also leaves your building with broken pipes that need to be repaired.

Insulating pipes also protects them from heat loss. This has multiple benefits:

  • There are fewer occupant complaints about not enough heat or hot water because water and steam aren’t cooling before they reach units.
  • Your boiler won’t have to run as often to compensate for heat loss, so you save money on fuel and water, as well as on boiler wear and tear. Reducing excessive boiler use extends its lifespan and reduces unexpected service calls for repairs.
  • Heat loss can cause pipes to “sweat,” which is water condensation on the pipe’s exterior. Sweating, which can also occur with cold pipes in humid environments, can eventually precipitate corrosion, which leads to leaks, water loss, and pipe failure.

Also, in some cases, insulating pipes protects building maintenance staff in their vicinity. Burns and other injuries can reduce your available manpower and even result in workers compensation claims.

Your most vulnerable pipes

We often speak about insulating the most vulnerable pipes in a building. Which ones do we mean?

  • Pipes for heat and hot water distribution
  • Any pipes in cold areas of the building, such as along the roof and north-facing walls, surfaces exposed to wind, and spots that never see sunshine
  • Water lines that run through humid areas of the building
  • Pipes near the boiler, usually anywhere in the boiler room

Types of Pipe Insulation

Foam insulation

Most people are familiar with this type of insulation, as it’s also used in single-family homes and duplexes for DIY pipe protection. Usually, it looks like a swimming pool noodle. It’s ideal for use on pipes that are easy to access, such as those under bathroom and kitchen cabinets or exposed pipes in laundry rooms. However, visible pipes in your boiler room require more heavy-duty insulation (see below).

An opening runs lengthwise on each segment, so you can simply snap it around any pipes that need insulation, using a utility knife to cut it to the measurements you need. Some versions come with tape to seal it once the insulation has been applied. Otherwise, you should do this yourself to keep your pipes fully contained.

Nitrile foam rubber insulation

This is another type of insulation you can use for do-it-yourself application. You’ll find it in tubes, sheets, and coils, and many models are self-sealing.

Nitrile foam rubber insulation has many uses, and it prevents heat loss and sweating condensation. We use it for plumbing protection, and it’s also popular with HVAC professionals for heating and air conditioning components.

This kind of pipe insulation can be applied to pipes that get as hot as 105 degrees Celsius, or 221 degrees Fahrenheit. You can also use it outdoors, provided you add a UV-resistant paint finish.

Mineral fiber insulation

This insulation is the foil-coated type you’ve probably seen in commercial boiler rooms. This is because it works with pipes that get as hot as 700 degrees Celsius (a whopping 1,292 degrees Fahrenheit!). Like nitrile foam rubber insulation, it can be used outside too if you utilize an additional protective sheet covering. Because this insulation is typically applied to boiler room piping, it should be installed by a professional like Sanitary Plumbing or our partners at Calray Boilers.

EPDM foam rubber insulation

Mostly used in conjunction with solar heating, EPDM foam rubber insulation is made to be used outdoors and comes with built-in UV protection. It can handle temperatures up to 150 degrees Celsius, or 302 degrees Fahrenheit.

Phenolic foam insulation

Another type of insulation that should be applied by experts, this insulation gives the best sealing for pipes. It is used in large-scale applications, including industrial piping, heating, and air conditioning. The range of temperatures this insulation accommodates makes it a go-to in these settings: up to 120 degrees Celsius (248 degrees Fahrenheit) and as low as -50 degrees Celsius (-58 degrees Fahrenheit).

Phenolic foam insulation is pre-formed and available in different diameters to suit a range of pipes. It can also be purchased in slabs or sheets for more customized use.

You may have noted that for all but the most simple pipe insulation jobs, a professional is your best choice to select the right materials and ensure the job is done properly. You may also have pipes inside a wall or in another inaccessible space that need insulation – this is quite common with some of the vulnerable piping described above. This is another scenario where a licensed plumber should apply the insulation for you, for a minimum of disruption and to make certain you aren’t missing any pipes at risk of freezing.

Don’t wait until fall to think about insulating pipes in your property! Take advantage of the summer lull before heat season begins, and call Sanitary Plumbing today at 212-734-5000 to schedule a service call.


Our Privacy Policy

Omnia Mechanical Group(the “Company”) strives to ensure the highest standards for property listings and customer information privacy. Please review the following statement to learn about our company practices and policies. Please be aware that our Privacy Policy is subject to change at any time.

1. Purpose.

This Privacy Policy (“the Policy”) provides information on how the Company uses your personal information. By agreeing to the Policy, you agree to our collection and use of your personal information as described in the Policy. This Privacy Policy is effective for all new users of Sanitaryplumbing.com.

2. Personal Information.

You can browse some areas of omniagroup.nyc (“the Website”) without being a registered user. However, certain activities do require registration. (You consent to the transfer and storage of your information by registering with omniagroup.nyc).

3. Use of Information.

Our primary purpose in collecting personal information is to provide you with a safe and user-friendly experience. For example, the Company may use your personal information to:

  • Improve our services and the Website’s content and layout;
  • Provide the services and necessary customer support you request;
  • Resolve disputes, collect fees, and troubleshoot problems;
  • Track and record customer satisfaction with our services;
  • Protect the Company against error and fraud;
  • Inform you of special promotions and announcements;
  • Enforce our agreements, terms, conditions, and policies; and
  • As otherwise described to you at the time of collection.

We may occasionally ask you to complete optional surveys. These surveys are used to improve and customize your experience with Sanitaryplumbing.com.

The Company always provides you the ability to opt-out of further communication such as promotions and surveys; see the Opt-Out section below.

The Company does not share any of your personal information with outside organizations, companies, individuals, etc. The only exception to this standard is if such a disclosure is reasonably necessary to respond to any and all legal processes.

4. Links to Other Sites.

The Website may have links to other websites that may collect personally identifiable information about you. The Company is not responsible for the privacy practices of the content of those linked websites.

5. Safety & Security Precautions.

The Website has strict security measures in place to protect you and your information from fraud. Once your information is provided to Omnia Mechanical Group, we strive to ensure the confidentiality of your identity and information.

6. Opt-Out.

The Company provides you with the opportunity to opt-out of receiving promotional and other non-essential, marketing-related communications from Omnia Mechanical Group. If you would like to opt-out of these select communications, please see any of the Company’s email communications and follow the directions indicated.

7. Account Protection.

Your password ensures the security of your account. When choosing a password, the Company suggests using various characters. It is highly recommended that you do not disclose your Sanitaryplumbing.com password to anyone. (If you do disclose your password or your personal information with others, you are responsible for all actions taken in the name of your account.) If the security of your password is compromised for any reason, please contact the Company immediately.

8. Accuracy of Information

The Company does not guarantee the accuracy of information for any and all of its properties on the Website, and is not responsible for any errors or misrepresentations (made by Renters, the Client, or otherwise).

9. Cookies

The Company may place a small cookie on your computer’s hard drive. This allows us to personalize your use on the Website. In order to maximize the functionality and usability of the Website, you must set your browser’s preferences to allow both permanent and temporary cookies.

10. Changing Your Personal Information.

Should your personal information change, please immediately update your information on the Website. This will ensure the accuracy of our records. The Company does retain personal information from closed accounts in order to comply with law and collect and disburse any fees owed.

11. Third Parties

This Privacy Policy addresses only the use of information we collect from you. Since omniagroup.nyc does not control the privacy policies of third parties, you are subject to the privacy policies of those third parties. It is advisable that you consult with the management of third parties before you disclose your personal information to others.

12. General

We may amend this Privacy Policy at any time by posting the amended terms on the Website. All amended terms are immediately effective after they are initially posted on the Website.

13. Privacy Policy Questions & Concerns

Questions and/or concerns regarding the Policy should be emailed to the following email address: info@omniagroup.nyc.