What Does a Hartford Loop Do? The Purpose of This Boiler Structure and Common Installation Errors

Invented in 1919, the Hartford loop was a game-changer in the boiler industry; the component, together with modern low-water shutoffs, prevents the unsafe and unstable operation of steam boilers. Before the invention of the loop, cracked and exploding boilers plagued the industry. One insurer, the Hartford Steam Boiler and Inspection Company, founded in 1866, grew tired of the dangerous issues and created the design, putting immediate mandates into effect. Consequently, the design became an industry staple, but what does a Hartford loop do exactly?

What Does a Hartford Loop Do, and Why Is It Necessary?

Understanding the Design

The Hartford Loop may not seem particularly groundbreaking. On the surface, it is a series of interconnected pipes that extends between the header of a steam boiler and the gravity return. The loop helps maintain the pressure balance between the steam feed to radiators and the return feed of condensation to the boiler. Condensed steam or water returns to the unit below the operating water level, lower than the lowest level by at least 2 inches. While the additional piping of the design may seem redundant, it serves a significant purpose: safety.

Acknowledging the Necessity of the Design

At first look, one might believe that the Hartford loop design is a case of over-engineering. After all, can’t an installer connect a return line directly to the boiler below the required 2-inch mark? Technically, an installer can do this, and prior to the invention of the Hartford loop, it was standard practice.

The problem with this installation method is that it fails to consider the pressure within the boiler. With a return line directly connected, any pressure within the boiler pushes all the water from the system into the line. So, what does a Hartford loop do to address this? It prevents dry-firing by balancing the system.

Before the Hartford loop, installers used check valves to eliminate backflow issues, but the valves often failed in the open position. Failures meant water still escaped the system, resulting in cracks and explosions. Old steam boilers relied on coal to fire and heat. Without water in the system, the boilers super-heated. The addition of water caused volatile reactions and presented significant safety risks to operators.

The Hartford loop is a piping configuration that came out of frustration and necessity. The Hartford Steam Boiler Insurance Company, tired of paying out on policies and frustrated with the level of hazards, created the pressure-equalizing design and made installation a requirement of coverage beginning in 1919.

Recognizing a Pervasive Flaw

Despite the ingenuity of the Hartford loop design, it was not a cure-all. The configuration works as intended; it maintains balanced pressure in the system to keep water in the boiler. Also, if a condensate return line fails, the loop only allows water to escape to the connection point level. Unfortunately, the design still allows water to escape the system.

A Hartford loop is still essential to steam boiler operation, even if a leak occurs in the return. The loop slows the leak and will not let the boiler empty its water completely. By maintaining a specific water level, the configuration gives boiler operators time to save the system and prevent catastrophic failure.

Still, without quick intervention, even low water levels can cause damage to a steam boiler. While the Hartford loop solved one massive issue, it could not resolve the other. It wasn’t until 1923 and the creation of the low-water cutoff that both problems had solutions, establishing a new standard for boiler safety.

Addressing Installation Errors

Most installation errors occur because an installer puts the return line in the wrong position. An incorrect installation can affect the pressure within the system. Also, some installers use the wrong nipple type. A Hartford loop requires a close nipple.

The close nipple reduces the noise within the equalizer. A long nipple acts like a gun barrel, producing violent water hammer reactions.

Incorrect installations can cause excessive wear on pipes and connections, increasing the risk of pipe or seal failures. While auto-shutoffs are built into most modern systems, it is still best to avoid common errors.

A steam boiler is a unique piece of machinery requiring skilled technicians for upkeep. For properties that still maintain steam systems, contact Calray Boilers to discuss annual service contracts and limit system risks.

What Does a Hartford Loop Do, and Why is Professional Maintenance Necessary?

Importance of Safe Operation and Regular Maintenance

What does a Hartford loop do? The piping configuration helps balance the return within a steam boiler system and prevents it from emptying water. While it is not the only safety feature that matters to steam boiler installation, the loop is a critical design. If your commercial or residential steam boiler is giving you problems, contact Calray Boilers at 212-722-5506 to schedule an inspection and discuss our annual service contracts.


Our Privacy Policy

Omnia Mechanical Group(the “Company”) strives to ensure the highest standards for property listings and customer information privacy. Please review the following statement to learn about our company practices and policies. Please be aware that our Privacy Policy is subject to change at any time.

1. Purpose.

This Privacy Policy (“the Policy”) provides information on how the Company uses your personal information. By agreeing to the Policy, you agree to our collection and use of your personal information as described in the Policy. This Privacy Policy is effective for all new users of Sanitaryplumbing.com.

2. Personal Information.

You can browse some areas of omniagroup.nyc (“the Website”) without being a registered user. However, certain activities do require registration. (You consent to the transfer and storage of your information by registering with omniagroup.nyc).

3. Use of Information.

Our primary purpose in collecting personal information is to provide you with a safe and user-friendly experience. For example, the Company may use your personal information to:

  • Improve our services and the Website’s content and layout;
  • Provide the services and necessary customer support you request;
  • Resolve disputes, collect fees, and troubleshoot problems;
  • Track and record customer satisfaction with our services;
  • Protect the Company against error and fraud;
  • Inform you of special promotions and announcements;
  • Enforce our agreements, terms, conditions, and policies; and
  • As otherwise described to you at the time of collection.

We may occasionally ask you to complete optional surveys. These surveys are used to improve and customize your experience with Sanitaryplumbing.com.

The Company always provides you the ability to opt-out of further communication such as promotions and surveys; see the Opt-Out section below.

The Company does not share any of your personal information with outside organizations, companies, individuals, etc. The only exception to this standard is if such a disclosure is reasonably necessary to respond to any and all legal processes.

4. Links to Other Sites.

The Website may have links to other websites that may collect personally identifiable information about you. The Company is not responsible for the privacy practices of the content of those linked websites.

5. Safety & Security Precautions.

The Website has strict security measures in place to protect you and your information from fraud. Once your information is provided to Omnia Mechanical Group, we strive to ensure the confidentiality of your identity and information.

6. Opt-Out.

The Company provides you with the opportunity to opt-out of receiving promotional and other non-essential, marketing-related communications from Omnia Mechanical Group. If you would like to opt-out of these select communications, please see any of the Company’s email communications and follow the directions indicated.

7. Account Protection.

Your password ensures the security of your account. When choosing a password, the Company suggests using various characters. It is highly recommended that you do not disclose your Sanitaryplumbing.com password to anyone. (If you do disclose your password or your personal information with others, you are responsible for all actions taken in the name of your account.) If the security of your password is compromised for any reason, please contact the Company immediately.

8. Accuracy of Information

The Company does not guarantee the accuracy of information for any and all of its properties on the Website, and is not responsible for any errors or misrepresentations (made by Renters, the Client, or otherwise).

9. Cookies

The Company may place a small cookie on your computer’s hard drive. This allows us to personalize your use on the Website. In order to maximize the functionality and usability of the Website, you must set your browser’s preferences to allow both permanent and temporary cookies.

10. Changing Your Personal Information.

Should your personal information change, please immediately update your information on the Website. This will ensure the accuracy of our records. The Company does retain personal information from closed accounts in order to comply with law and collect and disburse any fees owed.

11. Third Parties

This Privacy Policy addresses only the use of information we collect from you. Since omniagroup.nyc does not control the privacy policies of third parties, you are subject to the privacy policies of those third parties. It is advisable that you consult with the management of third parties before you disclose your personal information to others.

12. General

We may amend this Privacy Policy at any time by posting the amended terms on the Website. All amended terms are immediately effective after they are initially posted on the Website.

13. Privacy Policy Questions & Concerns

Questions and/or concerns regarding the Policy should be emailed to the following email address: info@omniagroup.nyc.